When we are using Veritas Netbackup as our primary data protection system on our environment, sometime we have to face the problem on our Netbackup daily operartion. This situation need our effort to be solve the problem immediately. Fortunately, the Netbackup is accompanied with the set of status code with (numerical order) which provides an overview of the problems plus an explanation and recommended action. At this article it will be shown up the Veritas Netbackup 8.2 status codes, the last Netbackup version released by Veritas. The article is taken from Veritas NetBackup™ 8.2 Status Codes Reference Guide.
Veritas Netbackup Status Code
0 the requested operation was successfully completed
1 The requested operation was partially successful
2 none of the requested files were backed up
3 valid archive image produced, but no files deleted due to non-fatal
4 archive file removal failed
5 Restore failed completely
6 User backup failed
7 the archive failed to back up the requested files
8 unable to determine the status of rbak
9 a necessary extension package is not installed or not configured properly
10 allocation failed
11 system call failed
12 file open failed
13 file read failed
14 file write failed
15 file close failed
16 unimplemented feature
17 pipe open failed
18 pipe close failed
19 getservbyname failed
20 invalid command parameter
21 socket open failed
22 socket close failed
23 socket read failed
24 socket write failed
25 cannot connect on socket
26 client/server handshaking failed
27 child process killed by signal
28 failed trying to fork a process
29 failed trying to exec a command
30 cannot get password information
31 could not set user ID for process
32 could not set group ID for process
33 failed while trying to send mail
34 failed waiting for child process
35 cannot make required directory
36 failed trying to allocate memory
37 operation requested by an invalid server
38 could not get group information
39 client name mismatch
40 network connection broken
41 network connection timed out
42 network read failed
43 unexpected message received
44 network write failed
45 request attempted on a non-reserved port
46 server not allowed access
47 host is unreachable
48 client host name could not be found
49 lient did not start
50 client process aborted
51 timed out waiting for database information
52 timed out waiting for media manager to mount volume
53 backup restore manager failed to read the file list
54 timed out connecting to client
55 permission denied by client during rcmd
56 client’s network is unreachable
57 client connection refused
58 can’t connect to client
59 access to the client was not allowed
60 client cannot read the mount table
61 the vnetd proxy encountered an error
63 process was killed by a signal
64 timed out waiting for the client backup to start
65 lient timed out waiting for the continue message from the media manager
66 client backup failed to receive the CONTINUE BACKUP message
67 client backup failed to read the file list
68 client timed out waiting for the file list
69 invalid filelist specification
70 an entry in the filelist expanded to too many characters
71 none of the files in the file list exist
72 the client type is incorrect in the configuration database
73 bpstart_notify failed
74 client timed out waiting for bpstart_notify to complete
75 client timed out waiting for bpend_notify to complete
76 client timed out reading file
77 execution of the specified system command returned a nonzero status
78 afs/dfs command failed
79 unsupported image format for the requested database query
80 Media Manager device daemon (ltid) is not active
81 Media Manager volume daemon (vmd) is not active
82 media manager killed by signal
83 media open error
84 media write error
85 media read error
86 media position error
87 media close error
89 problems encountered during setup of shared memory
90 media manager received no data for backup image
91 fatal NB media database error
92 media manager detected image that was not in tar format
93 media manager found wrong tape in drive
94 cannot position to correct image
95 Media ID is not assigned to this host in the EMM database
96 unable to allocate new media for backup, storage unit has none available
97 requested media ID is in use, cannot process request
98 error requesting media (tpreq)
99 NDMP backup failure
100 system error occurred while processing user command
101 failed opening mail pipe
102 failed closing mail pipe
103 error occurred during initialization, check configuration file
104 invalid file pathname
105 file pathname exceeds the maximum length allowed
106 invalid file pathname found, cannot process request
108 Action succeeded but auditing failed
109 invalid date specified
110 Cannot find the NetBackup configuration information
111 No entry was found in the server list
112 no files specified in the file list
114 unimplemented error code
116 VxSS authentication failed
117 VxSS access denied
118 VxSS authorization failed
120 cannot find configuration database record for requested NB database backup
121 no media is defined for the requested NB database backup
122 specified device path does not exist
123 specified disk path is not a directory
124 NB database backup failed, a path was not found or is inaccessible
125 a NetBackup catalog backup is in progress
126 NB database backup header is too large, too many paths specified
127 specified media or path does not contain a valid NB database backup header
128 NB database recovery failed, a process has encountered an exceptional condition
129 Disk storage unit is full
130 system error occurred
131 client is not validated to use the server
132 user is not validated to use the server from this client
133 invalid request
134 unable to process request because the server resources are busy
135 client is not validated to perform the requested operation
136 tir info was pruned from the image file
140 User ID was not superuser
141 file path specified is not absolute
142 file does not exist
143 invalid command protocol
144 invalid command usage
145 daemon is already running
146 cannot get a bound socket
147 required or specified copy was not found
148 daemon fork failed
149 master server request failed
150 termination requested by administrator
152 required value not set
153 server is not the master server
154 storage unit characteristics mismatched to request
155 disk is full
156 Snapshot error encountered
157 suspend requested by administrator
158 failed accessing daemon lock file
159 licensed use has been exceeded
160 Authentication failed
161 Evaluation software has expired.
162 incorrect server platform for license
163 media block size changed prior resume
164 unable to mount media because it is in a DOWN, or otherwise not available
165 NB image database contains no image fragments for requested backup id/copy number
166 backups are not allowed to span media
167 cannot find requested volume pool in EMM database
168 cannot overwrite media, data on it is protected
169 Media ID is either expired or will exceed maximum mounts
170 third party copy backup failure
171 media ID must be 6 or less characters
172 cannot read media header, may not be NetBackup media or is corrupted
173 cannot read backup header, media may be corrupted
174 media manager – system error occurred
175 not all requested files were restored
176 cannot perform specified media import operation
177 could not deassign media due to Media Manager error
178 Media ID is not in NetBackup volume pool
179 density is incorrect for the media ID
180 tar was successful
181 tar received an invalid argument
182 tar received an invalid file name
183 tar received an invalid archive
184 tar had an unexpected error
185 tar did not find all the files to be restored
186 tar received no data
189 the server is not allowed to write to the client’s file systems
190 found no images or media matching the selection criteria
191 no images were successfully processed
192 VxSS authentication is required but not available
193 VxSS authentication is requested but not allowed
194 the maximum number of jobs per client is set to 0
195 client backup was not attempted
196 client backup was not attempted because backup window closed
197 the specified schedule does not exist in the specified policy
198 no active policies contain schedules of the requested type for this client
199 operation not allowed during this time period
200 scheduler found no backups due to run
201 handshaking failed with server backup restore manager
202 timed out connecting to server backup restore manager
203 server backup restore manager’s network is unreachable
204 connection refused by server backup restore manager
205 cannot connect to server backup restore manager
206 access to server backup restore manager denied
207 error obtaining date of last backup for client
209 error creating or getting message queue
210 error receiving information on message queue
212 error sending information on message queue
213 no storage units available for use
215 failed reading global config database information
216 failed reading retention database information
217 failed reading storage unit database information
218 failed reading policy database information
219 the required storage unit is unavailable
220 database system error
223 an invalid entry was encountered
224 there was a conflicting specification
225 text exceeded allowed length
226 the entity already exists
227 no entity was found
228 unable to process request
229 events out of sequence – image inconsistency
230 the specified policy does not exist in the configuration database
231 schedule windows overlap
232 a protocol error has occurred
233 premature eof encountered
234 communication interrupted
235 inadequate buffer space
236 the specified client does not exist in an active policy within the configuration database
237 the specified schedule does not exist in an active policy in the configuration database
238 the database contains conflicting or erroneous entries
239 the specified client does not exist in the specified policy
240 no schedules of the correct type exist in this policy
241 the specified schedule is the wrong type for this request
242 operation would cause an illegal duplication
243 the client is not in the configuration
245 the specified policy is not of the correct client type
246 no active policies in the configuration database are of the correct client type
247 the specified policy is not active
248 there are no active policies in the configuration database
249 the file list is incomplete
250 the image was not created with TIR information
251 the tir information is zero length
252 An extended error status has been encountered, check detailed status
253 the catalog image .f file has been archived
254 server name not found in the NetBackup configuration
256 logic error encountered
257 failed to get job data
258 Vault duplication was aborted by administrator request
259 vault configuration file not found
260 failed to send signal
261 vault internal error 261
262 vault internal error 262
263 session ID assignment failed
265 session ID file is empty or corrupt
266 cannot find robot, vault, or profile in the vault configuration
267 cannot find the local host name
268 the vault session directory is either missing or inaccessible
269 no vault session ID was found
270 unable to obtain process id, getpid failed
271 vault XML version mismatch
272 execution of a vault notify script failed
273 invalid job id
274 no profile was specified
275 a session is already running for this vault
276 invalid session ID
277 unable to print reports
278 unable to collect pre eject information from the API
279 eject process is complete
280 there are no volumes to eject
281 vault core error
282 cannot connect to nbvault server
283 error(s) occurred during vault report generation
284 error(s) occurred during vault report distribution
285 unable to locate vault directory
286 vault internal error
287 vault eject failed
288 vault eject partially succeeded
289 cannot consolidate reports of sessions from container and slot-based vaults
290 one or more errors detected during eject processing
291 number of media has exceeded capacity of MAP; must perform manual eject using vltopmenu or vlteject
292 eject process failed to start
293 eject process has been aborted
294 vault catalog backup failed
295 eject process could not obtain information about the robot
296 process called but nothing to do
297 all volumes are not available to eject
298 the library is not ready to eject volumes
299 there is no available MAP for ejecting
300 vmchange eject verify not responding
301 vmchange api_eject command failed
302 error encountered trying backup of catalog (multiple tape catalog backup)
303 error encountered executing Media Manager command
304 specified profile not found
305 multiple profiles exist
306 Vault duplication partially succeeded
307 eject process has already been run for the requested Vault session
308 no images duplicated
309 report requested without eject being run
310 Updating of Media Manager database failed
311 Iron Mountain Report is already created for this session
312 invalid container database entry
313 container does not exist in container database
314 container database truncate operation failed
315 failed appending to container database
316 container_id is not unique in container database
317 container database close operation failed
318 container database lock operation failed
319 container database open operation failed
320 the specified container is not empty
321 container cannot hold any media from the specified robot
322 cannot find vault in vault configuration file
323 cannot find robot in vault configuration file
324 invalid data found in retention map file for duplication
325 unable to find policy/schedule for image using retention mapping
326 specified file contains no valid entry
327 no media ejected for the specified vault session
328 invalid container ID
329 invalid recall status
330 invalid database host
331 invalid container description
332 error getting information from EMM database
333 error getting information from media manager command line
334 unable to receive response from robot; robot not ready.
335 failure occurred while suspending media for eject
336 failure occurred while updating session information
337 failure occurred while updating the eject.mstr file
338 vault eject timed out
339 vault configuration file format error
340 vault configuration tag not found
341 vault configuration serialization failed
342 cannot modify – stale view
343 robot already exists
344 vault already exists
345 profile already exists
346 duplicate MAP
347 vault configuration cache not initialized
348 specified report does not exist
349 incorrect catalog backup policy
350 incorrect vault catalog backup schedule
351 all configured vault steps failed
400 Server Group Type is Invalid
401 Server Group Already Exists
402 Server Group Already Exists with a different type
403 Server Group Active State is not valid
404 Server Group does not exist
405 Member’s server type not compatible with Server Group
406 The computer specified is not a member of the server group specified
407 Member’s NetBackup version not compatible with Server Group
408 Server Group is in use
409 Member already exists in server group
501 You are not authorized to use this application.
502 No authorization entry exists in the auth.conf file for user name username. None of the NetBackup Java applications are available to you.
503 Invalid user name.
504 Incorrect password.
505 Cannot connect to the NetBackup Java authentication service on host on the configured port – (port_number). Check the log file for more details.
506 Cannot connect to the NetBackup Java user service on host on port port_number. If successfully logged in before, retry your last operation. Check the log file for more details.
507 Socket connection to the NetBackup Java user service has been broken. Retry your last operation. Check the log file for more details.
508 Cannot write file.
509 Cannot execute program.
510 File already exists: file_name
511 NetBackup Java application server interface error.
512 Internal error – a bad status packet was returned by NetBackup Java application server that did not contain an exit status code.
513 bpjava-msvc: the client is not compatible with this server version (server_version).
514 NetBackup Java: bpjava-msvc is not compatible with this application version (application_version). You may try logon to a different NetBackup host or exit the application. The remote NetBackup host has to be configured with the same version of NetBackup as the host you started the application on.
516 Could not recognize or initialize the requested locale – (locale_NetBackup Java_was_started_in).
517 Cannot connect to the NetBackup Java user service by VNETD on host on port configured_port_number. If successfully logged on beforehand, retry your last operation. Check the log file for more details.
518 No ports available in range (port_number) through (port_number) per the NBJAVA_CLIENT_PORT_WINDOW configuration option.
519 Invalid NBJAVA_CLIENT_PORT_WINDOW configuration option value: (option_value).
520 Invalid value for NetBackup Java configuration option (option_name): (option_value).
521 NetBackup Java Configuration file (file_name) does not exist.
522 NetBackup Java Configuration file (file_name) is not readable due to the following error: (message).
523 NetBackup Java application server protocol error.
525 Cannot connect to the NetBackup Java authentication service by VNETD on (host) on port (vnetd_configured_port_number). Check the log file for more details.
526 bpjava authentication service connection failed
527 bpjava user service connection if connection to pbx on port 1556 fails
537 Connection to the NetBackup database was not successful. Ensure that the database service is running.
538 unable to login
552 The Certificate Revocation List (CRL) could not be downloaded and,therefore, the certificate revocation status could not be verified. For more information, see the NetBackup logs.
600 an exception condition occurred
601 unable to open listen socket
602 cannot set non-blocking mode on the listen socket
603 cannot register handler for accepting new connections
604 no target storage unit specified for the new job
605 received error notification for the job
606 no robot on which the media can be read
607 no images were found to synthesize
608 storage unit query failed
609 reader failed
610 endpoint terminated with an error
611 no connection to reader
612 cannot send extents to bpsynth
613 cannot connect to read media server
614 cannot start reader on the media server
615 internal error 615
616 internal error 616
617 no drives available to start the reader process
618 internal error 618
619 internal error 619
620 internal error 620
621 unable to connect to bpcoord
622 connection to the peer process does not exist
623 execution of a command in a forked process failed
624 unable to send a start command to a reader or a writer process on media server
625 data marshalling error
626 data un-marshalling error
627 unexpected message received from bpsynth
628 insufficient data received
629 no message was received from bptm
630 unexpected message was received from bptm
631 received an error from bptm request to suspend media
632 received an error from bptm request to un-suspend media
633 unable to listen and register service by vnetd
634 no drives available to start the writer process
635 unable to register handle with the reactor
636 read from input socket failed
637 write on output socket failed
638 invalid arguments specified
639 specified policy does not exist
640 specified schedule was not found
641 invalid media type specified in the storage unit
642 duplicate backup images were found
643 unexpected message received from bpcoord
644 extent directive contained an unknown media ID
645 unable to start the writer on the media server
646 unable to get the address of the local listen socket
647 validation of synthetic image failed
648 unable to send extent message to BPXM
649 unexpected message received from BPXM
650 unable to send extent message to bpcoord
651 unable to issue the database query for policy
652 unable to issue the database query for policy information
653 unable to send a message to bpccord
654 internal error 654
655 no target storage unit was specified by command line
656 unable to send start synth message to bpcoord
657 unable to accept connection from the reader
658 unable to accept connection from the writer
659 unable to send a message to the writer child process
660 a synthetic backup request for media resources failed
661 unable to send exit message to the BPXM reader
662 unknown image referenced in the synth context message from BPXM
663 image does not have a fragment map
664 zero extents in the synthetic image, cannot proceed
665 termination requested by bpcoord
667 unable to open pipe between bpsynth and bpcoord
668 pipe fgets call from bpcoord failed
669 bpcoord startup validation failure
670 send buffer is full
671 query for list of component images failed
800 resource request failed
801 JM internal error
802 JM internal protocol error
803 JM terminating
805 Invalid jobid
806 this mpx group is unjoinable
807 not externalized
811 failed to communicate with resource requester
812 failed to communicate with Resource Broker
813 duplicate reference string specified
818 retention level mismatch
819 unable to communicate with JM proxy
823 no BRMComm to join
830 drive(s) unavailable or down
831 image has been validated
832 failed to write discover data to a file
833 error parsing discovered XML data
859 Exceeded maximum number of retries, unable to deactivate deployment host
860 Exceeded maximum number of retries, unable to activate deployment host
900 retry nbrb request later
901 RB internal error
902 RB invalid argument
903 RB communication error
904 RB max reallocation tries exceeded
905 RB media server mismatch
906 RB operator denied mount request
907 RB user canceled resource request
908 RB was reset
912 RB disk volume mount failed
914 RB media reservation not found
915 RB disk volume mount must retry
916 Resource request timed out
917 RB multiplexing group not found
918 RB does not have a multiplexing group that uses this media ID or drive name
1000 Client is offline
1001 discovery document error
1002 Discovery detected a failed client
1005 Missing one or more of the required policy values for unix_eca_cert_path, unix_eca_trust_store_path, or unix_eca_private_key_path
1006 Missing one or more of the required policy values forh, win_eca_trust_store_path, or win_eca_private_key_path
1007 Cannot specify policy values for win_eca_cert_path, win_eca_trust_store_path, win_eca_private_key_path, and win_eca_trust_store_path, win_eca_private_key_path, and win_eca_key_passphrasefile when the policy value win_eca_cert_store is specified.
1008 Missing required field unix_eca_crl_path.
1009 Missing required field win_eca_crl_path.
1010 Field unix_eca_crl_check_level must be use_path if field unix_eca_crl_path is specified.
1011 Field win_eca_crl_check_level must be use_path if field win_eca_crl_path is specified.
1012 Missing required field win_eca_crl_check_level.
1013 Invalid deployment_cert_source value, file must be specified.
1014 Invalid deployment_cert_source value, cert_store must be specified.
1057 A data corruption has been detected
1058 A data inconsistency has been detected and corrected automatically
1401 Invalid arguments received
1402 Hold ID or Hold name argument is invalid
1403 Backup ID argument is invalid
1405 No images are found.
1407 Invalid hold state
1408 Database error
1409 Unable to connect to database
1410 No data found
1411 Catalog error
1412 Hold record is being updated
1413 Requested hold is not found
1414 Duplicate hold found
1415 Duplicate image found
1416 Partially failed due to duplicate image
1417 Partially failed due to unhold image
1418 Requested image is not found
1419 Partially failed due to invalid image copy
1420 Backup ID argument is invalid
1421 Active holds cannot be changed
1422 Cannot deassign media on hold
1423 Unable to retrieve hold status of the image copies
1425 Requested hold is not found
1426 Retired holds cannot be changed
1500 Storage unit does not exist or cannot be used where specified
1501 Source operation cannot be used where specified
1502 Retention type cannot be used where specified
1503 Volume pool does not exist or cannot be used where specified
1504 Server group does not exist or cannot be used where specified
1505 alternate read server does not exist or cannot be used where specified
1506 data classification does not exist
1507 Invalid deferred operation flag
1508 Storage lifecycle policy exceeds maximum copies
1509 Storage lifecycle policy exceeds maximum backup operations
1510 storage lifecycle policy cannot have more than one snapshot operation
1511 storage lifecycle policy must have at least one fixed retention or snapshot
1512 storage lifecycle policy must have at least one backup, import, or snapshot operation
1513 invalid priority
1514 invalid operation type
1515 Multiplexing value is not valid or cannot be used where specified
1516 all storage units or groups must be on the same media server
1517 Invalid retention level
1518 backup image is not supported by storage lifecycle policy
1519 Images are in process
1521 Database not available
1522 Error executing database query
1523 Invalid fragment
1524 Duplicate image record
1525 Invalid lsu
1526 Storage lifecycle policy exceeds maximum import operations
1527 storage lifecycle policy can have only one of backup, import, and snapshot operations
1528 The source copy for an Auto Image Replication is not capable of replication
1529 The source copy for Auto Image Replication must specify a storage unit
1530 Only one Auto Image Replication allowed per copy
1531 An import storage lifecycle policy requires one copy with remote retention type
1532 Import failed because the imported image specifies an SLP name which does not exist
1533 Import failed because the imported image data class is different than the SLP data class
1534 Import failed because the imported image specifies an SLP name with no import operation
1535 Import failed because the imported image backup ID conflicts with an existing image
1536 The storage unit or storage unit group cannot be deleted because an The storage unit or storage unit group cannot be deleted because an
1537 Backup policy and storage lifecycle policy have conflicting configurations
1538 Data classification in the SLP conflicts with backup policy
1539 Backup policy generates snapshots but storage lifecycle policy does not handle them
1540 SLP expects snapshots but backup policy does not create them with SLP management enabled
1541 Snapshot creation failed. The maximum snapshot limit for the policy has been exceeded and no existing snapshots are eligible for expiration.
1542 An existing snapshot is no longer valid and cannot be mounted for subsequent operations
1543 Policy type is not compatible with SLP operations
1545 Schedule type is not compatible with SLP operations
1546 Capacity managed retention type is not compatible with SLP operations
1547 Expire after copy retention requires a dependent copy
1548 Retention type is not compatible with snapshot operation
1549 TIR information selection is not compatible with SLP operations
1552 The source and target storage units are not valid replication partners.
1553 Checkpoints are not allowed with SLP operations
1554 Storage unit snapshot capability is not compatible with operation characteristics
1556 The SLP deletion failed because a backup policy refers to it.
1557 Must specify mirror retention when target storage unit is mirror capable.
1558 Mirror retention is not allowed when target storage unit is not mirror capable.
1559 SLP referenced in policy or schedule not found
1560 Fixed or rotation retention required without a replication operation
1561 Policy using NDMP conflicts with multiple Backup From Snapshot operations in storage lifecycle policy
1562 Backup schedule generates snapshots but storage lifecycle policy does not handle them
1563 SLP expects snapshots but backup schedule does not create them
1564 Storage lifecycle policy contains errors
1565 Policy snapshot method is not compatible with SLP snapshot operations
1566 Storage unit required for snapshot operation when no other operation present
1567 Only one NDMP backup of a snapshot per backup ID is allowed
1568 Only one Index From Snapshot operation is allowed per storage lifecycle policy
1569 Snapshot storage unit is not configured for primary snapshots. It cannot be used in snapshot operation.
1570 Policy type does not support Index from Snapshot
1571 Data mover type specified in policy does not support Index from Snapshot
1572 Storage unit must be specified for this operation
1573 Backup image cannot be expired because its SLP processing is not yet complete
1574 Data Classification name cannot be ‘Any’ while creating new data classification
1575 Data Classification auto creation failed
1576 Topology validation failed
1577 Storage unit in the SLP does not match the accelerator attribute in policy
1578 Invalid window close options
1579 One or more images were not processed because the window closed
1580 VMware policy with PFI enabled requires an SLP
1581 Non-application consistent VMware policy is not compatible with snapdupe operations
1582 Application consistent VMware policy requires VM quiesce
1583 VMware policy with PFI enabled requires VIP auto discovery
1584 VMware policy with ‘Persistent Frozen Image’ enabled requires schedule type of Full Backup
1585 Backup image cannot be expired because not all dependent copies are expired
1586 SLP operation was canceled
1587 Storage lifecycle policy cannot have both target and untarget replication to remote master
1588 Target master server is already used in one of the replications to remote master
1589 Cannot connect to specified target master server
1590 Cannot find specified target import SLP
1591 No import SLP(s) found with compatible replication target device
1592 Trusted master servers are being referred by one or more Storage Lifecycle Policies (SLPs) on the source or target domain.
1593 Replication Director for VMware policy requires mapped backups
1594 Failed to determine disk media ID
1596 Select a storage lifecycle policy that has no snapshot operation as a policy’s Storage Destination
1597 Replication Director for Oracle policy requires an SLP
1598 Oracle policy with PFI and FI enabled requires an SLP
1599 Application schedule storage selection cannot be a snapshot SLP
1600 The Policy storage is a snapshot SLP and the Application schedule does not override the policy storage selection. Snapshot SLP storage is not allowed on an Application schedule.
1601 Full schedule requires a snapshot SLP
1602 The Policy storage is not a snapshot SLP and the Full schedule does not override the policy storage selection. Snapshot SLP storage is required on the Full schedule.
1603 Failed to save target SLP volume information
1604 No import SLP(s) found with compatible data class.
1608 The region asset that is used as a cloud snapshot replication destination does not exist. Enter a valid region asset.
1609 The region asset is already used as a cloud snapshot replication destination. Provide a different region asset.
1610 The provided region assets associate with different snapshot management servers. The provided region assets must associate with same snapshot management server.
1611 The assets that is subscribed to the protection plan belong to different snapshot management servers. Subscribed assets must belong to the same snapshot management server.
1612 Some of the selected assets belong to a snapshot management server other than the snapshot management server of the snapshot replication destination region asset. The assets must belong to the same snapshot management server.
1613 For some of the selected assets, the source region is same as the cloud snapshot replication destination region. The source region and the cloud snapshot replication destination region must be different.
1614 Cloud snapshot replication is supported only for Amazon cloud assets.
1615 Cloud snapshot replication is not supported for the asset type region.
1800 Invalid client list
1915 Cannot delete instance group that contains instances (delete or move instances first)
1916 Database error, cannot access the instance repository
1917 Cannot add instance group, this group name is already in use
1918 Cannot find a group by this name
1919 This instance or instance group was modified by another process, refresh before editing
1920 An instance with this name and client already exists
1921 The specified instance cannot be found
1922 An instance with this name/client is already registered
1924 Domain is a required field for Windows instances
1925 The requested operation(s) failed
1926 The entry specified already exists
1927 The entry specified does not exist
1928 The credentials for 1 or more instances could not be verified
1946 The current version of NetBackup on the client is incorrect for the validation of Oracle credentials without OS credentials.
1952 An availability group cannot be deleted when it is included in a policy. First remove the availability group from all policies.
2000 Unable to allocate new media for backup, storage unit has none available.
2001 No drives are available for this job
2002 Invalid STU identifier type
2003 Drive is not allocated
2004 Drive is already allocated
2005 MDS has received an invalid message from a media server
2006 NDMP credentials are not defined in EMM.
2007 Storage unit is not compatible with requesting job
2008 All compatible drive paths are down
2009 All compatible drive paths are down but media is available
2010 Job type is invalid
2011 The media server reported a system error
2012 Media has conflicts in EMM
2013 Error record insert failed
2014 Media is not assigned
2015 Media is expired
2016 Media is assigned to another server
2017 Media needs to be unmounted from a drive
2018 Number of cleanings is invalid
2019 Media is in a drive that is not configured on local system
2020 Robotic library is down on server
2021 Allocation record insert failed
2022 Allocation status record insert failed
2023 Allocation identifier is not known to EMM
2024 Allocation request update failed
2025 Allocation request delete failed
2026 Allocation status request delete failed
2027 Media server is not active
2028 Media is reserved
2029 EMM database is inconsistent
2030 Insufficient disk space or high water mark would be exceeded
2031 Media is not defined in EMM
2032 Media is in use according to EMM
2033 Media has been misplaced
2034 Retry the allocation request later
2035 Request needs to pend
2036 Drive is in a robotic library that is up
2037 Drive is not ready
2038 Media loaded in drive is not write-enabled
2039 SCSI reservation conflict detected
2040 Maximum job count has been reached for the storage unit
2041 Storage unit is down
2042 Density mismatch detected
2043 Requested slot is empty
2044 Media is assigned to another application
2045 Storage unit is disabled since max job count is less than 1
2046 Media is unmountable
2047 Media is write protected
2048 Media is in use by the ACS robotic library
2049 Media not found in the ACS robotic library
2050 ACS media has an unreadable external label
2051 ACS media is not in the drive’s domain
2052 An ACS Library Storage Module (LSM) is offline
2053 Media is in an inaccessible drive
2054 Media is in a drive that is currently in a DOWN state
2055 ACS physical drive is not available
2056 The file name used for the mount request already exists
2057 The scan host of the drive is not active
2058 LTID needs to be restarted on media servers before the device can be used
2059 The robotic library is not available
2060 Media needs to be rewound or unmounted from a drive
2061 The host is not an active node of a cluster
2062 Throttled job count has been reached for the storage unit
2063 Server is not licensed for the Remote Client Option
2064 Job history indicates that no media is available
2065 history indicates that no drive is available
2066 Disk pool not found
2067 Disk volume not found
2068 Disk volume mount point not found
2069 Disk volume mount point record insert failed
2070 The specified mount path will not fit in the allocated space
2071 Unable to find any storage servers for the request
2072 Invalid operation on static mount point
2073 Disk pool is down
2074 Disk volume is down
2075 Fibre Transport resources are not available
2076 DSM returned an unexpected error
2078 The maximum number of mounts for the disk volume have been exceeded
2079 DSM has detected that an invalid file system is mounted on the volume
2080 Disk volume has no max writers count
2081 Disk volume has no max readers count
2082 The drive needs to be marked as available
2083 The media affinity group is not defined in EMM
2084 Media affinity group record insert failed
2085 Disk volume is not available
2086 isk volume cannot be used for more than one copy in the same job
2087 Media allocation would exceed maximum partially full media limit
2088 Cleaning media is not available
2089 FT client is not running
2090 FT client has no devices configured
2091 FT client devices are offline
2092 FT server devices for client are offline
2093 No FT servers for this client are running
2094 STU cannot run Lifecycle backups
2095 STU cannot run VMware backup
2096 NDMP operation does not support multiple inline copies
2097 Storage unit group does not exist in EMM configuration
2098 Media pool is not eligible for this job
2099 Required drive or drive path is not configured
2100 Maximum number of mounts has been exceeded for tape media
2101 Media server not found in EMM database
2102 Storage unit does not support spanning
2103 Media server mismatch
2104 Storage units are not available
2105 Storage unit requested for replication job is not replication capable
2106 Disk storage server is down
2107 Requested media server does not have credentials or is not configured for the storage server
2108 Requested NDMP machine does not have credentials or is not configured in NetBackup
2109 Requested Fibre Transport client machine was not found in NetBackup configuration
2110 Requested machine is not configured in NetBackup
2111 All storage units are configured with On Demand Only and are not eligible for jobs requesting ANY storage unit
2112 NetBackup media server version is too low for the operation
2113 Invalid or no disk array credentials are added for vserver
2300 The vmRecoveryDestination field must be specified in the recovery request
2301 The alternateLocationDirectory field must not be blank.
2302 The instanceUuid field must not be blank.
2303 The stagingLocation field must not be blank.
2304 The datastore field must not be blank.
2305 Invalid virtual machine user name or password.
2306 The vmFiles field must not be blank.
2307 The source field of virtual machine files must not be blank.
2308 The destination field of virtual machine files must not be blank
2309 Failed to create the agentless recovery restore specification.
2310 The size field must not be blank.
2311 Failed to add guest virtual machine credentials.
2312 The alternateLocationDirectory must begin with a /.
2313 The source path of virtual machine files must begin with /.
2314 The destination path of virtual machine files must begin with /.
2317 Failed to remove guest virtual machine credentials.
2318 The appendString field must not be blank.
2319 Append string to file names is not supported for directories.
2320 Flatten directory structures is not supported for directories.
2504 Direct expiration of a mirror copy is not allowed
2505 Unable to connect to the database
2517 Backup set identifier may only contain a-z, A-Z, 0-9 and .-+_
2521 Datafile copy tag may only contain a-z, A-Z, 0-9 and .-+_
2522 Oracle policy cannot include a pluggable database with a FRA backup.
2523 Failed to add client to NetBackup configuration.
2524 Catalog backup failed because the passphrase for the disaster recovery package is not set.
2525 The passphrase for the disaster recovery package is not set. You must set it for the catalog backups to be successful.
2526 The master server certificate cannot be backed up from Windows certificate store during catalog backup.
2527 Changes are not allowed for a template that a protection plan manages.
2528 Changes are not allowed for an SLP that a protection plan manages.
2800 Standard policy restore error
2801 Oracle policy restore error
2802 Informix-On-BAR policy restore error
2803 Sybase policy restore error
2804 MS-SharePoint policy restore error
2805 MS-Windows policy restore error
2806 NetWare policy restore error
2807 SQL-BackTrack policy restore error
2808 Windows File System policy restore error
2809 MS-SQL-Server policy restore error
2810 MS-Exchange policy restore error
2811 SAP policy restore error
2812 DB2 policy restore error
2813 NDMP policy restore error
2814 FlashBackup policy restore error
2815 AFS policy restore error
2816 DataStore policy restore error
2817 FlashBackup Windows policy restore error
2818 NetBackup Catalog policy restore error
2819 Enterprise Vault policy restore error
2820 NetBackup VMware policy restore error
2821 Hyper-V policy restore error
2822 Hypervisor policy restore error
2826 Master server failed to connect to backup restore manager on media server for restore
2827 Client failed to connect to the media server for restore
2828 Restore failed because the MS-SQL-Server services are down
2829 Restore failed due to MS-SQL-Server database in use
2830 Restore failed due to an incorrect path in the MS-SQL-Server MOVE script
2831 Restore error
2832 Restore failed due to rename file format error
2833 Restore failed due to partition restore error
2834 Restore failed due to failure to read change block bitmap
2835 Restore failed due to corrupt image
2836 Restore failed because the bitmap size read from the image header differs from the expected size
2837 Restore failed due to invalid metadata
2838 Restore failed because no raw partitions were found
2839 Restore failed due to invalid raw partition ID
2840 Restore failed due to out of sequence raw partitions
2841 Restore failed due to failure to read the header from the backup image
2842 Restore failed due to failure to read the VMware bitmap
2843 Restore failed due to failure to start VxMS
2844 Restore failed due to failure to read the FIID file
2845 Restore failed due to failure to retrieve the bitmap
2846 Restore failed due to failure to retrieve the fsmap
2847 Restore failed due to failure to start the bptm writer
2848 Restore failed due to failure to create the virtual machine
2849 Restore failed due to failure to delete the virtual machine snapshot
2850 Restore error
2864 The disaster recovery package could not be imported.
2865 The database table could not be loaded.
2866 The specified passphrase is incorrect
2869 The identity package is corrupt.
2870 The master server certificate cannot be imported from the DR package to Windows certificate store.
2877 Hypervisor pre-restore operation failed
4000 Storage web server login failed.
4001 Failed to create the instant access mount.
4002 Failed to fetch the instant access mount list.
4003 Failed to fetch the instant access mount details.
4004 Failed to create an instant access virtual machine (VM).
4005 A backup image from an unsupported policy type was specified. Only PureDisk is supported
4006 A backup image from an unsupported policy type was specified. Only the VMware policy type is supported.
4007 Failed to fetch the storage server name
4008 Unexpected response from the storage web server.
4011 Failed to restore a single file to the specified virtual machine (VM).
4012 Failed to list instant access mount directory.
4013 Failed to delete the instant access mount.
4014 Invalid instant access mount ID.
4015 Instant access mount is not yet ready. Try again later.
4016 Failed to get the download URL from the instant access mount.
4017 Failed to get RSA public keys from the storage web server.
4019 Failed to fetch the storage server credentials.
4020 Failed to fetch VMware server credentials
4021 Invalid file path specified.
4022 Invalid virtual machine (VM) username/password.
4023 One of the required parameters (BIOS UUID, instance UUID, VM name) is invalid.
4024 Invalid virtual machine (VM) name specified.
4025 Failed to fetch image details
4200 Operation failed: Unable to acquire snapshot lock
4201 Incorrect snapshot method configuration or snapshot method not compatible for protecting backup selection entries
4202 Invalid or incompatible storage unit configured
4203 Invalid or unsupported backup selection filelist
4204 Incompatible client found
4205 Incorrect or no credentials found
4206 Authentication error occurred. NetBackup Client Service is running as Local System, this is likely incorrect.
4207 Could not fetch snapshot metadata or state files
4208 Could not send snapshot metadata or statefiles
4209 Snapshot metadata or statefiles cannot be created
4210 Incorrect or no content found in snapshot metadata
4211 Snapshot not accessible or invalid snapshot
4212 Recreation of snapshot failed
4213 Snapshot import failed
4214 Snapshot mount failed
4215 Snapshot deletion failed
4216 Snapshot cleanup failed
4217 Snapshot restore failed
4218 Snapshot deport failed
4219 Command operation failed: Third-party command or API execution failed
4220 Command operation failed: System command or API execution failed
4221 Found an invalid or unsupported configuration
4222 Operation failed: Unable to acquire policy lock to take snapshot
4223 Operation not completed
4224 STS Internal Error
4225 Unauthorized operation attempted by client or media on storage server
4226 Communication failure occurred with storage server
4227 STS Plug-in error occurred
4228 Storage server or plug-in version mismatch
4229 Insufficient resources or capabilities found by storage server
4230 Invalid storage topology or storage server configuration error
4231 STS Unexpected Error
4232 Invalid Discovery Query URI
4233 BIOS UUID client reference not allowed for vCloud
4234 VMware server login failure
4235 vCloud keyword used when vCloud not enabled
4236 vCloud policy includes multiple organizations
4237 Client does not meet policy requirements
4238 No server credentials configured for policy
4239 Unable to find the virtual machine
4240 Operation not supported
4241 Block-level incremental backups are not supported for this device
4243 Unable to connect to the VirtualCenter server
4245 Invalid pathname for backup selection
4246 The requested operation was partially successful
4248 Index from snapshot operation failed with an internal error
4249 Index from snapshot operation failed, catalog already exists
4250 Index from snapshot operation failed, unable to find child image or file information
4251 Index from snapshot operation failed. Failed to write into index database.
4252 Index from snapshot operation failed. Entry does not belong to any of the backup selection entries
4253 Index from snapshot operation failed. SLP version mismatch for current and previous backup image
4254 Invalid or no path found to create index database
4255 Index from snapshot using SnapDiff is disabled by the user
4256 Index from snapshot is not supported for the file system associated with backup selection
4257 Index from snapshot is not supported for the storage server
4258 Transient error encountered while taking Hyper-V VM snapshot
4259 Failed to find VirtualCenter host name in VMware Lookup Service
4260 Encountered SSO login failure
4261 Encountered VMware Internal Server Error
4262 Encountered VMware vCloud Suite API failure
4263 Encountered VMware SOAP API failure
4264 Encountered unexpected error while processing TagView XML
4265 Encountered a VMware Virtual Machine Server that does not support tags
4266 Encountered a VMware Virtual Machine Server that does not offer Tag APIs
4267 Failed to initialize Java Runtime Environment
4268 Failed to retrieve resource pool information
4269 Found multiple virtual machines with same identity
4270 A snapshot of the virtual machine exists and the policy option specifies aborting the backup
4271 Maximum virtual machine snapshots exceeded
4272 Maximum delta files exceeded
4273 Unable to lock the backup or restore host for virtual machine snapshot operations
4274 Failed to remove virtual machine snapshot
4275 Unable to consolidate Virtual Machine Disks
4276 Unable to retrieve Virtual Machine Disk information
4277 Virtual machine path contains unsupported characters
4278 Unable to retrieve virtual machine information
4279 Unable to retrieve virtual machine vCloud information
4280 Virtual machine contains independent and Raw Device Mapping disks only
4281 Virtual machine contains independent disks only
4282 Virtual machine contains Raw Device Mapping disks only
4283 Error detected while processing disk identifiers
4284 A NetBackup snapshot of the virtual machine exists and the policy option specifies aborting the backup
4290 Failed to create virtual machine snapshot. Virtual machine is busy performing another operation
4292 Unable to activate change block tracking in current state of virtual machine
4293 Invalid credentials or an access violation
4294 The virtual machine is disconnected
4295 VM retrieval failed.
4296 No server credentials configured
4297 Unable to obtain RHV server credentials
4298 Unable to obtain RHV manager version
4299 Unable to get topology view tree
4500 The number of images to be imported is more than the limit.
4501 Incorrect media ID is used while importing the image
4502 Invalid information about the master or the media server
4700 Unable to attach restored disks to target VM
4701 Unable to get virtual machine configuration for VM.
4702 Delete of existing VM failed with error
4703 Virtual machine creation failed, cannot proceed with restore
4704 Failed to create virtual machine with specified disks.
4705 Unable to retrieve virtual disk configuration.
4706 Incorrect virtual disk configuration retrieved.
4707 Unable to attach restored networks to target VM.
4708 Unable to attach restored tags to target VM
4709 Unable to set high availability option on target VM
4710 Failed to get VM Tags Information
4711 cURL encountered an error. Insufficient memory or inadequate resources available to complete the job.
4712 Resource name is empty.
4713 Resource name contains unsupported characters.
4714 Resource name length exceeds supported maximum length.
4715 Pre-recovery check failure.
4716 Unsupported hypervisor type.
4718 Invalid API request parameter
4719 Unable to read and understand virtual disk metadata.
4720 Encrypted Virtual Disk is not supported
4721 Compressed Virtual Disk is not supported.
4722 Failed to read from Virtual Disk.
4723 Failed to write into Virtual Disk.
4724 Invalid Disk Transfer Info.
4725 An internal error occurred.
4726 Failed to create snapshot of the specified VM
4727 Failed to fetch VM snapshot information.
4728 Failed to open the specified disk.
4729 Failed to read the specified disk
4730 Failed to close the specified disk.
4731 Received invalid response.
4732 Error in parsing the HTTP response.
4733 Operation failed due to locked status of VM.
4734 Failed to update catalog metadata of VM.
4735 Failed to read storage details of VM
4736 Failed to set power state of VM.
4737 Cannot create VM, VM already exists
4739 No disks are attached to the specified VM.
4740 Failed to parse catalog entry
4741 Access forbidden
4743 Invalid HTTP method
4744 Failed to make HTTP request
4745 Failed to get the signed ticket to download the disk from the RHV server. The disk might be in locked state
4746 Encountered unaligned page table entry in the Qcow2 disk. Repair the disk and retry the operation
4747 Storage domain type is undefined. Disk creation failed
4748 Virtual machine creation failed, cannot proceed with restore
4749 No server credentials configured.
4750 Unable to obtain server credentials
4751 Failed to delete the snapshot of the specified VM